Xerox DocuPrint 96MX PDL job source library compilation messages, PD0100 Noreplace specified

7.PDL (job source library compilation) messages

These messages may appear while a Job Source Library is being compiled using Print Description Language (PDL). PDL messages are assigned to levels 0-9, depending on the severity of the condition being reported. These levels are indicated by the first number appearing after the “PD” in the code.

The levels are as follows:

Level 0—confirmation

Level 1—information

Level 2—routine maintenance or actions

Level 4—system or tape problems

Level 7—system problems

Level 8—probable severe software errors

Level 9—probable severe hardware errors

Note: For instructions on compiling JSLs and list of PDL commands, refer to your DocuPrint 96/DocuPrint 96MX LPS PDL Reference.

PD0100 Noreplace specified.

A JDL object file that already exists was recompiled with NOREPLACE option. The new file will not replace the already existing one.

Action None.

PD0150 Replace specified.

A JDL object file that already exists was compiled again with the REPLACE option. The new file will replace the already existing one.

Action None.

PD0200 JDL replaced

A JDL file has been replaced by a new file with the same name.

Action None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 7-1