Xerox DocuPrint 96MX manual OS8051 IPD communication initialization failure

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS8051 IPD communication; initialization failure.

An unexpected error was detected when attempting to open communications with input and the job was then aborted.

Action 1. Reset the system before entering the next START command.

a.Enter the RESET command.

b.Resend the job.

2.If the message reappears, stop communications via HIP and reboot the system.

a.If HIP is active, enter the HIPSTOP: OFFLINE command.

b.Press the Boot button and enter B.

c.Enter the HIP ONLINE;START command, if desired.

d.Resend the job.

e.If the problem continues, resysgen, if authorized to do so,

or

Contact your systems specialist (refer to your DocuPrint 96/ DocuPrint 96MX LPS System Generation Guide).

OS8052 IPD dynamic memory; initialization failure.

An unexpected error was detected when IPD failed to acquire sufficient memory and the job was then aborted.

Action 1. Reset the system before entering the next START command.

a.Enter the RESET command.

b.Resend the job.

2.If the message reappears, stop communications via HIP and reboot the system.

a.If HIP is active, enter the HIPSTOP: OFFLINE command.

b.Press the Boot button and enter B.

c.Enter the HIP ONLINE;START command, if desired.

d.Resend the job.

e.If the problem continues, resysgen, if authorized to do so,

or

Contact your systems specialist (refer to your DocuPrint 96/ DocuPrint 96MX LPS System Generation Guide).

OS8053 IPD File management; initialization failure. (IPDDIR.SYS)

IPD could not find or create IPDDIR.SYS, resulting in a job abort.

Action	1.	RNAME IPDDIR.SYS to some well-known name (e.g.,
		BADnnn.TMP).
	2.	Resend the job.
	3.	Contact your systems specialist or Xerox Customer Support to
		log the bad sector and delete the well-known name.

6-116 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE