Xerox DocuPrint 96MX manual OS2091 No available trays are ready, OS2100 Main tray not ready

		OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2091	No available trays are ready
	The tray(s) available for your job are not ready to be used. Possible
	causes may be that they are empty, have the wrong type of stock, are
	not properly latched, etc.
Action	1.	Check the status of your trays, and correct as appropriate
	2.	Select different trays for the job.
OS2100	Main tray not ready
	Feeder tray 1 has not risen completely.
Action	Pull out the feeder tray and push it back in all the way. (The tray rises
	automatically.)
OS2106	Enter ‘CONTINUE I’ when volume xx is mounted
	or
	Select ‘CONTINUE I’ when volume xx is mounted
	Automatic job recovery was initiated after a system rollover while a
	multivolume offline job was being processed.
Action	1.	Load the tape volume number indicated.
	2.	Enter the CONTINUE I command to resume data transmission.
OS2150	Display (Y/N)?
	This message asks you if you want relevant information to appear on
	the system controller display.
Action	Enter Y for yes or N for no.
OS2210	Bin x full.
	The bin indicated in the message is full, thus causing the printer to
	cycle down or preventing it from cycling up.
Action	1.	Empty the bin.
	2.	Restart the job.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-51