Xerox DocuPrint 96MX manual OS1131 FEX Problem communicating with the IOT. Exiting

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS1106		Lowercase characters not valid in machine serial number
		Lowercase characters are not valid in the machine serial number.
	Action	1. Verify the tray(s) or bin(s) in your command.
		or
		Select a different tray or bin.
		2. Retry the command.
OS1131		FEX: Problem communicating with the IOT. Exiting.
		FEX has detected a problem communicating with the printer.
	Action	Restart FEX.
OS1132		--- NVM Finishing locations ---
		This message lists the values that are currently in the printer‘s non-
		volatile memory.
	Action	Save (write down) these values so that you can restore them should
		an FEX communications problem lose these values from the printer‘s
		non-volatile memory.
OS1133		FEX: Warning, number of pages is greater than 23.
		This message advises you that you have selected too many pages
		for the FEX test print job.
	Action	1. Select fewer pages for the test case job.
		2. Retry running FEX.
		Note: This may be an issue only with certain finishing devices
		which require readjustments for page sets of more than 23
		pages. Consult your finishing device documentation for
		additional information.
OS1134		Checking for existence of x.x on system
		FEX is looking for the requested .FRM directory in the system‘s
		memory. If FEX finds the requested form name, it will show ‘FOUND’
		on the display.
	Action	None.
OS1135		FEX: Error, Form: x.x does not exist. Exiting.
		FEX cannot find the requested .FRM directory in the system.
	Action	Verify the form directory (file-name) and retry the command.

6-16 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE