Xerox DocuPrint 96MX manual OS3025 If fault continues enter ‘SEL TRAY’ or ‘ABORT O’ or

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS3025	If fault continues enter ‘SEL TRAY’ or ‘ABORT O’ or
	A fault in the collection area of the stitcher/stacker has occurred
	(followed by message OS2000 PRESS CONTINUE TO RESUME
	PRINTING).
Action	Press the <CON> key to resume printing, ignoring the fault.
	or
	Enter the SELECT TRAY command to redirect the output to the
	sample tray.
	or
	Abort the current report with the ABORT O command.
OS3026 If fault continues, enter ‘STITCH OFF’
	A stitcher fault has occurred.
Action	1. Press the <CON> key to ignore the first occurrence of the fault.

2.If the fault continues, enter the STITCH OFF command to turn off the stitching option.

3.Contact your systems specialist or Xerox Customer Service.

OS3040	Output offset failure. Set will not be offset
	A stitcher/stacker offset failure has occurred.
Action	Check output for proper job separation (two jobs may have been
	combined).

OS3050	Stitcher is out of wire
	The stitcher has run out of wire.
Action	Replace stitcher wire if you are ACT-trained.
	or
	Contact your systems specialist or Xerox Customer Service.
OS3190	Close rear door
	This message instructs you to close the rear door of the printer before
	starting or resuming your job.
Action	None.

6-78 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE