Xerox DocuPrint 96MX manual Cannot use Reserved Words in file names, Client-Layer is established

	DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
	Cannot use Reserved Words in file names.
	The words CON, CLOCK$, AUX, COM(1-4), LPT(1-4), NUL, and
	PRN are recognized by the PC User Interface as DOS commands
	and therefore cannot be used in file names.
Action	Rename any file that has these terms in the file name.
	Client-Layer is established
	The DocuPrint 96/DocuPrint 96MX LPS is communicating normally.
Action	Before printing, check the PC user interface or printer control console
	for instructions on clearing any existing faults. If you are instructed to
	select CLEAR, you can either select the Clear Faults button on the
	PC user interface screen, or enter CLE in the command line
	message window.
	Command sequence error, FGRP_HEADER not 1st.
	The first group of report definitions must define the header; other
	records were encountered.
Action	If the problem persists, call Xerox Customer Service.
	Command sequence error, group not larger than last.
	At least one of the report definition groups is out of order.
Action	If the problem persists, call Xerox Customer Service.
	Command sequence error, number out of range.
	Numeric parameter for a report definition command is out of range.
Action	If the problem persists, call Xerox Customer Service.
	Command sequence error, record number not equal to last +1.
	One or more of the report definition commands are out of order.
Action	If the problem persists, call Xerox Customer Service.
	Communication with the Printer is established
	TBD
Action	Low-level communication between the system controller and the
	printer has been established. The system will now attempt to initialize
	Client-Layer communication.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 15-31