Xerox DocuPrint 96MX OS1262 Sysgen paper size out of range, OS1263 Form paper size out of range

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS1262	Sysgen paper size out of range
	If a paper size statement is not included in the JDL, the system will
	use the values specified at SYSGEN. This message indicates that
	the SYSGEN value is not supported by the IOT.
Action	Perform a MINI SYSGEN and correct the default paper size.

OS1263	Form paper size out of range: xxxxxx.xxx
	Paper size for form specified in the JSL is not supported by the IOT.
Action	Contact your systems specialist.
OS1264	Barcode sequence mismatch
	The IOT detected a sequence number other than the one expected.
Action	Check the job, correct the reason for the mismatch and rerun.
OS1265	Printer status request already in progress
	A previous request for printer status is still being processed.
Action	None.
OS1266	A Barcode was specified, none found
	The IOT did not detect a barcode where one was expected.
Action	Check Read Head alignment, bar code programming or continue job
	in BAR OFF mode.
OS1267	ESS didn’t confirm duplex hint
	A sheet abort request was sent to the ESS from the IOT because the
	ESS did not confirm a hint for the second side of a sheet already
	committed to the paper path.
Action	None.
OS1268	Bar Align: sheet delivered. Seq1 = nn, Seq2 = nn
	Sheets with sequence numbers have been read and delivered with
	the printer operating in the bar align mode. Seq1 - front side, Seq2 -
	back side.
Action	None.
OS1269	Bar Align: sheet delivered
	Sheets were delivered but no sequence numbers were read with the
	printer operating in the bar align mode.
Action	None.

6-20 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE