Xerox DocuPrint 96MX manual OS Level 2 Routine Maintenance, OS2002 Check paper supply in Tray

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS Level 2: Routine Maintenance

States a condition and explains what action(s) to take.

OS2000	Enter ‘CONTINUE O’ to resume printing
	or
	Select ‘CONTINUE O’ to resume printing
	Printing was interrupted by the entered command or a system
	rollover. The system is now ready to continue printing.
	The printer control console displays:
	PRESS ‘CONTINUE’ TO RESUME PRINTING
Action	Enter the CONTINUE O command or press the <CON> key to
	continue printing the interrupted job.

OS2002	Check paper supply in Tray 1
	Fewer than 25 sheets remain in (feeder) tray 1.
	The printer control console displays one of the following:
	CHECK PAPER SUPPLY IN TRAY 1
	JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 1
	PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 1
	READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 1
Action	1. Add paper to (feeder) tray 1. (Refer to the chapter on feeder
	trays in your DocuPrint 96/DocuPrint 96MX LPS Operator
	Guide.)
	2. Press the <CON> key to resume printing.

OS2003	Check paper supply in Tray 2
	Fewer than 25 sheets remain in (feeder) tray 2.
	The printer control console displays one of the following:
	JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 2
	CHECK PAPER SUPPLY IN TRAY 2
	PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 2
	READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 2
Action	Add paper to feeder tray 2. (Refer to the chapter on feeder trays in
	your DocuPrint 96/DocuPrint 96MX LPS Operator Guide.)

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-45