Xerox DocuPrint 96MX manual Scale command messages

11.SCALE command messages

	The SCALE command enables scanned graphic images (fonts,
	forms, and logos) to print at an enlarged or reduced size under
	certain conditions. Refer to your DocuPrint 96/DocuPrint 96MX LPS
	Operations Reference chapters on HIP-accessed communicating
	modes and using graphics for detailed information about the SCALE
	command.
	**Cannot open input file: xxxx
	The requested input file is not found.
Action	Verify the input file name and reenter the command. (Refer to your
	DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter
	on managing LPS resources for additional information.)
	**Cannot open output file: xxxx
	The requested output file cannot be created or the required space is
	not available on the disk.
Action	1. Verify the output file name and reenter the command. (Refer to
	your DocuPrint 96/DocuPrint 96MX LPS Operations Reference
	chapter on managing LPS resources for additional information.)

2.Compress the disk(s) to free more contiguous (adjoining) sectors on the disk(s).

	**Cannot scale files of requested type: xxxx
	The requested file cannot be scaled.
Action	Verify the file type and reenter the command. The file type must be
	FRM, FNT, FN6, LG0, or LG6. (Refer to your DocuPrint 96/DocuPrint
	96MX LPS Operations Reference chapter on managing LPS
	resources for additional information.)

**Dashing not supported**

Scaling of the requested form has produced a pattern of lines and spaces that SCALE cannot equate to 600 spi.

Action None.

**DIAG - CHAR x in yyyy exceeds byte escape; set to 0. 425in**

The character named in the message has a width that has been set to .425 by SCALE. Widths that have been overridden in this way no longer represent the actual size of the characters and may yield output which appears compressed

Action None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 11-1