Xerox DocuPrint 96MX OS2740 JDE not found. Check and retry, OS2741 JDL not found. Check and retry

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS2740	JDE not found. Check and retry.
	The JDE entered in the START command does not exist on the
	system disk.
Action	Reenter the START command with the correct JDE. (Refer to the
	online chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
	Guide.)

OS2741	JDL not found. Check and retry.
	The JDL entered in the START command does not exist on the
	system disk.
Action	Reenter the START command with the correct JDL. (Refer to the
	online chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
	Guide.)

OS2745	Enter password for document.
	“DocumentPassword” The correct password must be entered before
	the job can be continued.
Action	Key in the correct password.

OS2750	Job not found. Check and retry.
	The job id number entered in the START command was not sent.
Action	1.	Verify that the job number was entered correctly.
	2.	Reenter the START command.
	3.	If the message reappears, resend the job.

OS2760	Sample file not found. Check and reenter.
	The SAMPLE command was entered, but the file name requested for
	sampling is not in the system.
Action	1. Verify the file name and reenter the SAMPLE command
	correctly.

2.If the message reappears, load the desired file to the system disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations Reference chapter on managing LPS resources for additional information.)

6-66 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE