Xerox DocuPrint 96MX Invalid custom signal data, Messages 1538 through, Config file read error

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

574	Invalid custom signal data
	The format of this system controller signal is invalid.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
	Messages 1538 through 1572
	The following messages (1538 through 1572) are the results of
	problems/warnings/status that could occur with the initialization and
	startup of the PC UI.
1538	Configuration file cannot be found
	The PC user interface configuration file is missing or cannot be
	located on the hard disk.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
1539	Config file read error
	MS-DOS cannot read data from the PC user interface configuration
	file.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
1541	No keyword in configuration data
	PC user interface files may be corrupted.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
1542	Unrecognized configuration keyword
	A keyword in the PC user interface configuration file is not in the list
	of allowable keywords.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
1543	No parameter data in configuration record
	A statement in the PC user interface configuration file has a keyword,
	but no data to the right of the “=” sign.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.
1544	Invalid mouse click rate
	A double click interval of zero was specified.
Action	Select the OK header button to retry the process. If the problem
	persists, call Xerox Customer Service.

15-8 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE