Xerox DocuPrint 96MX HP1250 Transmission complete job id, HP1260 Interface busy cannot send files

	HIP (HOST INTERFACE PROCESSOR) MESSAGES
HP1250	Transmission complete: job id xxxx
	The host has completed sending the indicated job to the printer. The
	job will now begin printing.
Action	None.
HP1260	Interface busy - cannot send file(s)
	The HIP SEND command was entered. The interface is busy and is
	unable to send files from the host at this time.
Action	Wait for current transmission to complete.
HP1265	Online interface already in use
	The XPAF host was already online when the HIP HOST XPF
	command was entered.
Action	None.
HP1270	Change of job nn to file xxxxxx completed successfully
	The CHANGE command successfully created the file.
Action	None.
HP1280	HIP reset not allowed. Invalid task state
	HIP is online and/or jobs in the HIP queue are not completed. HIP
	must be offline and all jobs must be completed before the HIP
	RESET command can be invoked (these restrictions do not apply at
	logon level 4).
Action	None.
HP1290	Host suspended pending pass-through job initiation
	A pass-through job was received and the HIP online interface was
	suspended.
Action	None.
HP1291	HIP resuming following pass-through job
	The pass-through job has completed and HIP is ready to receive data
Action	None.
HP1298	XPS communications recovered
	HIP can now receive data via the XPS communication mode. Data
	received but not yet written to system disk will be copied from
	memory (saved at system error restart) and written to system disk.
	The system then reestablishes the communications link and
	continues to receive the next block of data.
Action	None.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 4-7