Xerox DocuPrint 96MX manual OS9800 Hardware error/Disk Input. Call for service

		OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS9800	Hardware error/Disk - Input. Call for service.
	A fatal system disk error has occurred in input.
Action	1.	Restart the job.
	2.	If the failure recurs, contact your systems specialist or Xerox
		Customer Service.
OS9900	System cannot go “ONLINE.”
	The ONLINE command was entered, but a fatal error in online
	interface prevents it from being processed.
Action	1.	Reenter the ONLINE command.

2.If the failure recurs, contact your systems specialist or Xerox Customer Service.

OS9910	System cannot go “READY.”
	A fatal error in the online interface has occurred during power-up.
Action	1.	Repeat the powerup sequence. (Refer to the powering on and
		off chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
		Guide.)
	2.	If the failure recurs, contact your systems specialist or Xerox
		Customer Service.

OS9920	No system log. Call for service.
	The system attempted to update the error log and found none for the
	current job while printing.
Action	1. Enter the PROBLEM command to reinitialize the error log.

2.Rerun the job.

3.If the message reappears, contact your systems specialist or Xerox Service Support Center. (May require reformat and resysgen.)

OS9950 Memory is too degraded to use. Call for service.

Memory problems are sufficiently severe that there is not enough memory to run, even in degraded mode.

Action	1.	Reboot the system by pressing the Boot button, then entering
		B.
	2.	If the message reappears, contact your systems specialist or
		Xerox Service Support Center.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 6-129