Xerox DocuPrint 96MX manual IF2720 Syntax error in statement, IF2730 Semantic error in statement

IFU (INTERPRESS FONT UTILITY) MESSAGES

IF2720	Syntax error in statement x
	An error exists in the given statement.
Action	Check and reenter the command, using the corrected statement.
IF2730	Semantic error in statement x
	An error exists in the meaning of the statement as formatted.
Action	Check and reenter the command, using the corrected statement.
IF2790	Parser error: next _ charcalled with invalid mode
	An error has occurred while the system was reading the command
	line. This could be the result of a previous syntax error in the
	command line.
Action	Check the command syntax and retry.
IF2791	Parser error: invalid next _ char (2) call
	An error has occurred while the system was reading the command
	line. This could be the result of a previous syntax error in the
	command line.
Action	Check the command syntax and retry.
IF2805	Invalid medium parameter
	The statement that defines the source (TAPE, CASSETTE, DISK,
	FLOPPY) of the FIS master is incorrect.
Action	Check and reenter the command using an allowable type of medium.
IF2850	Invalid LPS seed parameter
	The statement defining the LPS seed name (the base or root of the
	name) of the newly created font file is incorrect.
Action	1. Verify the seed name in the LPS seed name parameter in the
	font profile, and reenter the command.
	2. If the message reappears, contact your systems specialist or
	Xerox Customer Support.
IF2851	Invalid default font name
	The default substitution font requested is incorrect.
Action	Check and reenter the DEFAULT statement using an acceptable font
	name.

5-18 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE