Xerox DocuPrint 96MX manual Cannot allocate memory for report phase record during crash, Recovery

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES

	Cannot allocate memory for report phase record during crash
	recovery.
	Insufficient Windows resources to allocate a report phase record to
	support crash recovery.
Action	If the problem persists, call Xerox Customer Service.

Cannot allocate memory for waste management record.

Insufficient system memory exists to allocate memory for a waste management record.

Action If the problem persists, call Xerox Customer Service.

	Cannot expand memory region.
	Insufficient system memory available to display a large list of Audit
	Logs.
Action	Try a filtered list of logs, if the problem persists, call Xerox Customer
	Service.

	Cannot find input phase to match output phase.
	An output signal has been received that cannot be matched by report
	number to its corresponding input.
Action	If the problem persists, call Xerox Customer Service.

	Cannot open in-process file for crash recovery.
	The record manager is unable to open the in-process file to support
	crash recovery.
Action	If the problem persists, call Xerox Customer Service.

	Cannot open Master Directory file for crash recovery.
	The record manager is unable to open the master directory file to
	support crash recovery.
Action	If the problem persists, call Xerox Customer Service.

	Cannot read in-process file during crash recovery.
	The record manager has detected an error while reading the in-
	process file to support crash recovery.
Action	If the problem persists, call Xerox Customer Service.

	Cannot save a log onto itself.
	You cannot save a console log to hard disk under the name “current
	log.”
Action	Save the log under a different name.

15-30 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE