Xerox DocuPrint 96MX manual IF2080 Reading, IF2090 Interpress font was not found

IFU (INTERPRESS FONT UTILITY) MESSAGES

IF2061 Attempting to append to a non IFU COPY medium. Mount correct medium or initialize the medium and retry

Appending an IFU COPY WRITE file to the end of a non IFU COPY medium is not permitted.

Action 1. Mount the correct tape

or

Initialize the medium via the IFU VOLINIT command if the data on the tape is not needed. (Refer to your DocuPrint 96/ DocuPrint 96MX LPS Operations Reference chapter on managing LPS resources for additional information.)

2. Retry the command.

IF2062 This is an IFU COPY medium but it contains no IFU data. please mount the correct medium to read

There is no data on the medium to read.

Action	1.	Mount the correct medium with the needed data.
	2.	Enter C to continue reading

IF2080 Reading x.

The IFU COPY READ command was reading an Interpress font family name when end of volume was reached. A message will follow asking whether you wish to continue searching onto the next volume or quit the operation.

Action	1.	Mount the next volume.
	2.	Enter C to continue reading.

Note: If you elect to quit the operation, a warning message will follow indicating that exiting execution at this time may corrupt the font structure on the system.

IF2090	Interpress font was not found
	The Interpress font name requested has not been found during an
	IFU COPY READ command. A message will follow asking whether
	you wish to continue searching onto the next volume or quit the
	operation.
Action	Mount next volume to continue searching
	or
	Discontinue the operation.

5-8 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE