Xerox DocuPrint 96MX manual PD9410, PD9420, PD9430, PD9440, PD9450, PD9460, PD9470, PD9480

	PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
PD8550	I/O error, processing SEF mapping file.
	An I/O error occurred while processing the Short Edge Feed font
	mapping file.
Action	Recompile the JSL that generated the requested mapping file and
	retry the operation.
PD8570	Device does not exist %0.
	The specified device does not exist. Check command and retry.
Action	None.
PD8800	Insufficient dynamic memory, try rebooting system.
	Not enough core memory remains for the entered command.
	Compiling will abort.
Action	1. Reboot the system by pressing the Boot button and entering B
	at the keyboard.
	2. Retry compiling JDL.
	3. If the message reappears, contact your systems specialist or
	Xerox Customer Service.
PD9400	DISK ERROR—JDL FILE
PD9410	DISK ERROR—WORK FILE
PD9420	DISK ERROR—SOURCE FILE
PD9430	DISK ERROR—CME FILE
PD9440	DISK ERROR—PDE FILE
PD9450	DISK ERROR—PRINT FILE
PD9460	DISK ERROR—PCC TABLE
PD9470	DISK ERROR—CATALOG FILE
PD9480	DISK ERROR—RTEXT FILE
	The system is unable to access or perform any operation on the
	indicated file because of a fatal system disk error.
Action	1. Retry the command. This message should not reappear if the
	failure was an intermittent system disk error

2.If the message reappears, contact your systems specialist or Xerox Customer Service.

PD9500 Open error —Print File.

The system is unable to open the print file due to a system disk error.

Action	1.	Retry compiling.
	2.	If the message reappears, contact your systems specialist or
		Xerox Customer Service.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 7-5