Xerox DocuPrint 96MX manual PD1110 JSL contains unsupported features, PD2915 Security violation

	PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
PD1110	JSL contains unsupported features.
	There are features invoked in the JSL which are not currently
	supported by the DocuPrint 96/DocuPrint 96MX.
Action	None.
PD1200	Use the IFU IPFNTS Command to compile IPFNTS.
	PDL no longer supports the interpress font mapping feature. Use IFU
	for that purpose.
Action	None.
PD2700	Operator command error, retry.
	A PDL command was entered incorrectly.
Action	Reenter the command correctly.
PD2740	JSL not found. Check and retry.
	JSL id was entered incorrectly.
Action	Reenter the JSL identification correctly.
	or
	Enter a different JSL id.
PD2915	Security violation.
	A requested file has been protected by the SECURE system
	command. An attempt was made to access it at a wrong logon level.
Action	To access the file, obtain the correct password and logon at Level 5.
	(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
	Reference, chapter 1, “System setup,” “File access and command
	protection commands” section.)
PD4500	Tape read error.
	The magnetic tape format does not match the language code entered
	in JSL
Action	Reenter the code correctly.
PD4550	PDL internal error -- Tape I/O.
	The system is unable to read a magnetic tape block. Compiling will
	abort.
Action	1. Clean the magnetic tape drive. (Refer to the maintenance
	chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
	Guide.)
	2. Restart the job.
	3. If the problem recurs, recreate the tape.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE 7-3