Xerox DocuPrint 96MX manual OS6780 Unsupported JDL option may jeopardize job integrity

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS6780	Unsupported JDL option may jeopardize job integrity.
	You have submitted a parameter in a DJDE or PDL command, such
	as SESMAP or TRANS, which is not supported by 4050, 4090, 4650
	printers. The appearance or position of your output may be affected.
Action	1.	Check your output to see if it is satisfactory.
	2.	If the output is unsatisfactory, recode the JSL eliminating the
		unsupported parameter.

OS6781	Unsupported DJDE option encountered. See OPRINFO Page.
	A DJDE option was encountered which is not supported on this
	printer.
Action	Check OPRINFO page for unsupported option.

OS6782 Paper size exceeds printer capability.

In the PDL OUTPUT command you have specified a larger paper size than the paper trays of the 4050, 4090, 4650 printers can accommodate.

Action None.

OS6800	No XCS File specified for 850 job.
	You have specified an invalid XCS file for 850 job.
Action	Check your XCS file format.
OS6810	No XCS File specified for Ethernet Job.
	“Volume Host = ENET” was coded in JDL, but .XCS was not entered
	in document-name parameter of CWP,STA[RT] command. Job will
	abort.
Action	1. Reenter CWP,STA[RT] command, including .XCS extension in
	document name. (Refer to your Xerox LPS Reference Manual,
	“Ethernet communications interface” chapter.)
	2. Resend job.
OS6819	Improper file format. Record size is not 80 bytes.
	The application has specified a disk-resident Ink List, but when the
	file is accessed, it is found to be of the wrong format.
Action	Check the application.
OS6820	Improper palette-name specification
	The palette-name you have specified contains nonalphanumeric
	characters and/or more than 32 characters.
Action	Check the palette-name and retry the command.

6-104 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE