Xerox DocuPrint 96MX manual IF2973 No valid characters were found in character set

IFU (INTERPRESS FONT UTILITY) MESSAGES

IF2973	No valid characters were found in character set x
	In processing the FIS master, the substitute character’s raster bitmap
	is either missing or defective.
Action	1.	Correct the CHARS parameter of the font profile.
	2.	Reenter the ADD command.

IF2974	Character x is in the system reserved area
	No characters may be added in the range 0-208 or 0-20 (octal).
	These positions are reserved for system use.
Action	1.	Remove the invalid characters from the CHARS parameter in
		the font profile.
	2.	Reenter the ADD command.

IF2975 Contour fonts require RIP option; aborting ADD

The FIS master contains contour character shapes which require the RIP option.

Action None.

IF2976	Some parameter(s) are not in easy values.
	One or more of the parameters specified in the font profile do not
	match the easy values of the FIS font master.
Action	1.	Correct the font profile to match the easy values.
	2.	Reenter the ADD command.

IF2979	Invalid DCALSO parameter.
	The DCALSO (DATA CENTER ALSO) parameter specified in the
	font profile is incorrect.
Action	1.	Change the DCALSO parameter in the font profile to YES or
		NO.
	2.	Retry the ADD command.

IF4010 Easy values are missing point sizes or orientations

The FIS master is incorrectly formatted and, therefore, does not specify point sizes and orientation.

Action None.

IF4110	FIS master error; aborting ADD
	Due to an error in the FIS master, the requested ADD command is
	being aborted.
Action	1.	Obtain a valid FIS master.
	2.	Retry the command.

5-24 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE