II
CYCLE OPTION BUTTONS
Your washing machine features several additional cycle options to customize cycles to meet your individual needs.
_1 Turn ON the washer and turn the cycle selector knob to select the desired cycle.
_1 Use the cycle modifier buttons to adjust the settings for that cycle.
_1 Press the cycle option button(s) for the option(s) you would like to add. The button will light when that option is selected.
If the selected option is not allowed for the selected cycle, the chime will sound twice to inform you that it is not allowed.
OPress the START/PAUSE button to start the cycle. The cycle will begin after the lid lock is activated.
NOTE: To protect your garments, not every option is available with every cycle. See the CYCLE GUIDE on page 14 for details.
NOTE: If the START/PAUSE button is not pressed within 4 minutes, the control will shut off and the settings will be lost.
STAIN TREAT
Use this option to wash loads with mul-
Stain Treat tiple types of soils. With this option, the water temperature is raised in three
steps to optimize cleaning performance. During the final wash step, the water is heated and maintained at the highest temperature for that cycle for 10 minutes.
NOTE: The best results are obtained with smaller loads (less than 6 Ibs).
SAVE ENERGY
Save Energy@_l This option saves energy by using cool- er temperatures and different operations
to help maintain washer performance while reducing energy consumption.
SAVE ENERGY + is only available for the following cycles and settings:
•NORMAL/CASUAL cycle with HOT/COLD water temper- ature
•NORMAL!CASUAL cycle with WARM/COLD water tem- perature
•HEAVY DUTY cycle with HOT/COLD water temperature
20
EXTRA RINSE
I Extra Rinse This option will add an extra rinse to
Wo,oP__o, the selected cycle. Use this option to help ensure the removal of detergent or
bleach residue from fabrics. Pressing the EXTRA RINSE button twice will add two additional rinses to the cycle. The LED will be on steady for either one or two extra rinses.
Press the POWER button to turn on the washer.
Turn the cycle selector knob to select the desired cycle.
Press the CYCLE MODIFIER buttons to change the desired settings.
Press the EXTRA RINSE button once or twice to select one or two extra rinses. The LED will be on.
•If you want to delete extra rinse, press the button one or two more times until the EXTRA RINSE light is off.
Press the START/PAUSE button to start the cycle.
NOTE: You cannot select the EXTRA RINSE option with the DRAIN & SPIN cycle.
WATER PLUS
Extra Rinse __1Select this option to add extra water to
Water Plus }Yl the wash and rinse cycles. This option is especially useful for extra large or
bulky items. Press and hold the EXTRA RINSE button for 3 seconds to activate or deactivate WATER PLUS. When WATER PLUS is selected, the LED will be blinking.
OPress the START/PAUSE button during wash or rinse cycle.(It is not available in spin cycle)
_) Press and hold the EXTRA RINSE.
Press the START/PAUSE button to start the cycle.
OIf you want to use additional water, repeat steps 1 through 3.
NOTE: If the machine reaches its maximum water level, the WATER PLUS button will have no effect.
NOTE: You cannot select the WATER PLUS option in the SANITIZATION, BULKY/BEDDING, and CLEAN WASH- ER cycle.
CLEAN WASHER
Clean Washer i?l Aoccurbuildupin theof washdetergenttub overresiduetimecanand can lead to a mildewy or musty odors.
The CLEAN WASHER cycle is specially designed to remove this buildup using bleach or other cleaner designed specifically for cleaning washers.
The CLEAN WASHER cycle should be run once a month, or more often under heavy use conditions or if odor is present. See the page 23 for details.
II
