II

KEY PARTS AND COMPONENTS

OLID LOCK

The washer lid is locked during operation. The lid can be unlocked by pressing the START/PAUSE button to stop the washer.

OULTRA-CAPACITY STAINLESS STEEL TUB

The ultra-large stainless steel tub offers extreme dura- bility.

_1 SOFT CLOSE LID

The SOFT CLOSE lid is a safety device that closes the lid slowly. The SOFT CLOSE hinges allow the lid to close gently and quietly.

TEMPERED GLASS LID

The tempered glass lid is durable and makes it easy to observe the washer.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can be adjusted using the cycle setting buttons anytime before starting the cycle.

REAR CONTROL PANEL WITH LED DISPLAY The easy-to-read LED display show cycle options, settings, cycle status and estimated time remaining.

O SMARTRINSE WITH JET RINSE

This washer is designed to save rinse water by using the SMARTRINSE with jet rinse in NORMAL/CASUAL and HEAVY DUTY cycles.

NOTE: Select the FABRIC SOFTENER option or EXTRA RINSE option if liquid fabric softener is used in NORMAL!CASUAL and HEAVY DUTY cycles. Failure

to select the these options will greatly reduce the effectiveness of the softener.

_1 WATER HEATER (NOT VISIBLE)

The heater inside the tub is used to increase the water temperature if the incoming water is not at the correct temperature. This makes sure the water reaches the proper temperature for the selected cycle or options, especially for the SANITIZE and WHITEST WHITES cycles.

6

Hot Water

Cold Water

Inlet valve

Inlet valve

Power

Cord

Drain

Hose

Included Accessories

Hot and Cold Water Hoses (with2 seals per hose at each ends)

• Cable tie (for securing drain hose)

II

Page 6
Image 6
Kenmore 796.292796 manual KEY Parts and Components