JVC RX-E100RSL manual Mastering Remote Operations

Mastering Remote Operations

❏To change the transmittable signals for operating an

VCR

1.Press and hold VCR .

2.Press VCR.

3.Enter manufacturer’s code using buttons 1–9, and 0.

4.Release VCR .

Now, you can perform the following operations on the VCR.

VCR	: Turn on or off the VCR.
CHANNEL +/–	: Change the channels.
1 – 10, 0, +10 (+100)	: Select the channels.
PLAY	: Start playback.
STOP	: Stop playback.
PAUSE	: Pause playback. To release it, press
	PLAY.
FF	: Fast-wind a tape.
REW	: Rewind a tape.
Ö REC	: • Press this button with the PLAY
	button to start recording pressed and
	hold.
	• Press this button with the PAUSE
	button to enter recording pause.

Note:

Refer to the manual supplied with your VCR.

5.Try to operate your VCR by pressing VCR . When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

Manufacturers’ codes for VCR

Manufacturer	Codes
JVC	01
AIWA	02, 20
BELL+HOWELL	03, 16
BLAUPUNKT	04
CGM	03, 05, 16
DAEWOO	34
DIGTAL	05
FISHER	03, 16
G.E.	06
GRUNDIG	07
HITACHI	08, 09
LOEWE	05, 10, 11
MAGNAVOX	04, 05
MITSUBISHI	12 – 15
NOKIA	16
NORDMENDE	17 – 19, 31
ORION	20
PANASONIC	21
PHILIPS	05, 22
PHONOLA	05
SABA	17 – 19, 23, 31
SAMSUNG	24, 25
SANYO	03, 16
SHARP	26, 27
SIEMENS	07
SONY	28 – 30, 35
TELEFUNKEN	17 – 19, 31, 32
TOSHIBA	33

❏To change the transmittable signals for operating a

TV

1.Press and hold TV .

2.Press TV.

3.Enter manufacturer’s code using buttons 1–9, and 0.

4.Release TV .

Now, you can perform the following operations on the TV.

TV	: Turn on or off the TV.
TV VOL +/–	: Adjust the volume.
TV/VIDEO	: Set the input mode (either TV or
	VIDEO)
CHANNEL +/–	: Change the channels.
1 – 9, 0, +10 (+100)	: Select the channels.
RETURN (10)	: Function as the RETURN button.

Note:

Refer to the manual supplied with your TV.

5.Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

Manufacturers’ codes for TV

Manufacturer	Codes
JVC	01
AKAI	02, 05
BLAUPUNKT	03
DAEWOO	10, 31, 32
FENNER	04, 31, 32
FISHER	05
GRUNDIG	06
HITACHI	07, 08
INNO-HIT	09
IRRADIO	02, 05
MAGNAVOX	10
MITSUBISHI	11, 33
MIVER	03
NOKIA	12, 34
NORDMENDE	13, 14, 18, 26 – 28
OKANO	09
ORION	15
PANASONIC	16, 17
PHILIPS	10
SABA	13, 14, 18, 26 – 28
SAMSUNG	10, 19, 32
SANYO	05
SCHNEIDER	02, 05
SHARP	20
SONY	21 – 25
TELEFUNKEN	13, 14, 18, 26 – 28
THOMSON	13, 14, 18, 26 – 28, 30
TOSHIBA	29

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

44