To tune in a preset station
1Press FM/AM to select the band.
The last received station of the selected band is tuned in, and the CONTROL buttons now work for tuner operations.
Selecting the FM Reception Mode | Remote |
NOT |
When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station.
Tuner Operations
FM/AM
TUNED ST AUTO MUTING
Before you start, remember...
MHZ |
VOL |
Ex.: When selecting the FM band
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
2 Press CONTROL °(or 5) repeatedly until | 1 While listening to an FM station, press | |
CONTROL ° (or 5) repeatedly until | ||
“< PRESET >” appears on the display. | ||
“< FM MODE >” appears on the display. | ||
| ||
CONTROL | CONTROL |
TUNED ST AUTO MUTING
TUNED ST AUTO MUTING
MHZ |
VOL |
VOL |
Then
TUNED | ST | AUTO | MUTING |
|
|
| MHZ |
VOL |
Preset channel number appears.
3Press CONTROL 3or 2to select a preset channel number you want.
CONTROL
2Press CONTROL 3(or 2) to select “MONO.”
•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”
CONTROL
ANALOG L | R | TUNED |
MHZ
VOL
TUNED ST | AUTO MUTING | * “AUTO MUTING” is the initial setting. |
| MHZ |
VOL |
•Pressing (or holding) CONTROL 3increases the preset channel numbers.
•Pressing (or holding) CONTROL 2decreases the preset channel numbers.
When using the remote control
1Press FM or AM.
The last received station of the selected band is tuned in, and the 10 keys now work for tuner operations.
2Press the 10 keys to select a preset channel number.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 30, press +10, +10, then 10.
MONO : Select this to improve the reception (but stereo effect will be lost).
In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off from the display. (The ST indicator also goes off.)
AUTO MUTING : Normally select this. When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.
To restore the stereo effect
Repeat step 1, then select “AUTO MUTING” in step 2.
25