Reinforcing the Bass
You can boost the bass level — Bass Boost.
• You have to make this adjustment for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
Adjusting the Tone
You can adjust the bass and treble sounds as you like.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
Sound Adjustments
1 Press ADJUST. | 1 Press ADJUST. | ||
ADJUST | The CONTROL buttons now work for sound | ADJUST | The CONTROL buttons now work for sound |
| adjustments. |
| adjustments. |
2 Press CONTROL °(or 5) repeatedly until “B. | 2 Press CONTROL ° (or 5) repeatedly until | ||
“BASS” or “TREBLE” (with the current | |||
BOOST (Bass Boost)” (with the current setting) * | setting)* appears. | ||
appears on the display. | CONTROL |
| |
|
|
| |
CONTROL
C | ANALOG | L | C | R | PRO LOGIC |
|
LPCM | SUBWFR LFE DSP |
| ||||
|
| |||||
TO | DOLBY D | LS | S | RS | DGTL AUTO | VOL |
DTS | INPUT ATT | |||||
T | VOL |
|
|
|
|
|
* “OFF” is the initial setting. If you have already changed the setting, “ON” will be shown.
3 Press CONTROL 3 (or 2) to turn “ON” or |
| |
BASS : To adjust the bass. | ||
“OFF” Bass Boost. |
| |
TREBLE : To adjust the treble. | ||
| ||
CONTROL |
| |
|
ANALOG | L | C | R | PRO LOGIC |
|
LPCM | SUBWFR LFE DSP |
| |||
DOLBY D | LS | S | RS | DGTL AUTO | VOL |
DTS | INPUT ATT | ||||
ON : Select this to boost the bass level. (Bass Boost)
OFF : Select this to deactivate Bass Boost.
Note:
This function affects the sound outputting only through the front speakers.
When using the remote control
Press BASS BOOST.
•Each time you press the button, Bass Boost turns on and off alternately.
*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.
3Press CONTROL 3or 2to adjust the sound level.
CONTROL
ANALOG | L | C | R | PRO LOGIC |
|
LPCM | SUBWFR LFE DSP |
| |||
DOLBY D | LS | S | RS | DGTL AUTO | VOL |
DTS | INPUT ATT | ||||
Ex.: When adjusting the bass level
•Pressing CONTROL 3increases the sound level by +2 steps (from
•Pressing CONTROL 2decreases the sound level by
4Repeat steps 2 and 3 to adjust the other sound level.
When using the remote control
1Press SOUND.
10 keys now work for sound adjustments.
2Press BASS +/– or TREBLE +/– to adjust the sound output level (from
21
