JVC RX-E100RSL STB DVD Player, Connecting the Power Cord, Getting Started, For digital sounds

VCR

TV

For digital sounds

•To enjoy the DVD software encoded with Dolby Digital or DTS Digital Surround, connect the DVD player using one of the DIGITAL IN terminals (see page 7).

•To enjoy the digital sounds, use both the SCART cable connection and the digital connection (see page 7).

•To enjoy the digital broadcast sounds, connect the STB and/or TV to the DIGITAL IN terminals (see page 7).

For T-V LINK

•You can also use T-V LINK function if you connect the T-V LINK compatible TV and VCR to this unit with a fully wired SCART cables. For details on T-V LINK, see the manuals supplied with the TV and the VCR.

•Connect SCART cable to EXT-2 terminal on your TV for T-V LINK function.

Getting Started

STB

DVD Player

STANDBY ON

For TV and video format

When the TV is equipped with the plural SCART terminals, see the manual supplied with the TV to check the available video signals for each terminal, then connect SCART cable correctly. For details, see the manuals supplied with the TV.

This unit cannot change the video signals (S-video or Composite). When the video signal of one video component is different from that of the other (for example, one is S- video, the other is Composite), you may not see the pictures appropriately. In this case, unify the video signals of all the video components into S-video or Composite, or you need to switch the video signal of TV each time you change the source.

For recording pictures from STB

When you connect a STB and a VCR directly with a SCART cable, you can enjoy recording the pictures from the STB on VCR tapes without menu screens of STB. For details, see the manuals supplied with the STB.

For an analogue decoder

To watch or record a scrambled program on your VCR, connect the analogue decoder to your VCR and select the scrambled channel on your VCR.

If there is not an appropriate terminal for the decoder on your VCR, connect the decoder to the TV.

Refer also to the manuals supplied with these equipment.

Connecting the Power Cord

Before plugging the unit into an AC outlet, make sure that all connections have been made.

Plug the power cord into an AC outlet.

9