Compaq AP200 manual 4Error Codes

E-4Error Codes

Power-On Self Test Message		Continued
Message	Beeps*	Probable Cause	Recommended Action
201-Memory Error	None	RAM failure	1.	Make sure your
				memory module(s)
				(if any) are installed
				properly.
			2.	Replace the
				memory module(s).
			3.	Replace the system
				board.
203-Memory Address	None	RAM failure	1.	Make sure your
				memory module(s)
Error
			2.	Replace the
				memory module(s).
			3.	Replace the system
				board.
207-ECC Corrected	2S	Single Bit ECC error	Replace DIMM if error
Single Bit Errors in			persists.
DIMM/SIMM Pair(s) X,
X, ...
213-Incompatible	2S	A DIMM module in DIMM	Replace the DIMM with a
DIMM Module in		socket identified in the error	module conforming to
DIMM Socket(s) X, X,		message is missing critical	the SPD standard. See
...		SPD information, or it is	Chapter 4, “Hardware
		incompatible with the chipset.	Upgrades.”

* L = Long, S = Short

Continued

Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003

File Name: L-APPE.DOC Last Saved On: 12/14/98 2:40 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED