![](/images/new-backgrounds/1299300/299300115x1.webp)
Remote System Installation
Remote System Installation allows you to start and set up your system using the software and configuration information located on a network server. The Remote System Installation feature is usually used as a system setup and configuration tool, and can be used for the following tasks:
■Formatting a hard drive
■Installing an operating system
■Installing application software or drivers
To initiate Remote System Installation, press F12 when the F12=Network
Service Boot message appears in the
Replicating Your Setup
This procedure gives an administrator the ability to easily copy one setup configuration to other workstations of the same model. This enables faster, more consistent configuration of multiple workstations. To replicate your setup:
1.Turn on or restart the workstation.
2.When you see the words “F10=Setup” appear in the
NOTE: If you do not press the F10 key while the message is displayed, you must turn off the workstation, then on again to access the utility.
3.From the main menu, select File, then select Save to Floppy and follow the instructions on the screen.
4.To replicate the configuration, select File, then select Restore from Floppy and follow the instructions on the screen.
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name: