Compaq AP200 Country-Specific Requirements, Table C-1 Power Cord Set Requirements By Country

C-2Power Cord Requirements

Country-Specific Requirements

Use the following table to identify the appropriate accredited agency in your country.

Table C-1

Power Cord Set Requirements - By Country

Country	Accredited Agency	Applicable Note Numbers
Australia	EANSW	1
Austria	OVE	1
Belgium	CEBC	1
Canada	CSA	2
Denmark	DEMKO	1
Finland	SETI	1
France	UTE	1
Germany	VDE	1
Italy	IMQ	1
Japan	JIS	3
Norway	NEMKO	1
Sweden	SEMKO	1
Switzerland	SEV	1
United Kingdom	BSI	1
United States	UL	2

NOTES:

1.Flexible cords must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm2 conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country where it will be used.

2.Flexible cords must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall plugs must be a two-pole grounding type with a NEMA 5-15P (15A, 125V).

3.The appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration number in accordance with the Japanese Dentori Law. Flexible cord must be Type VCT or VCTF, 3-conductor, 1.0 mm2 conductor size. Wall plugs must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7A, 125V) configuration.

Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003

File Name: J-APPC.DOC Last Saved On: 12/14/98 11:23 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED