Compaq AP200 manual Attaching a 3.5-inch drive to the 5.25-inch adapter

4-31

Installing a 3.5-Inch Drive into the

Third-height, 5.25-Inch Drive Bay

1.Turn off the workstation and any external drives. Disconnect the power cord from the grounded AC outlet. Disconnect the network cable and any external devices from the system. Then remove the workstation access panel.

IMPORTANT: On a power-managed system, the power cord must be disconnected from the grounded AC outlet.

2.Install one guide screw on the right side of the drive 2.

3.Insert the drive into the adapter 1 so that the guide screw aligns in the slot 2, then attach with the two retaining screws.

4.Snap on the brace 3.

5.Insert the brace into the adapter side tray slots 4.

4

43

2

1

2

Figure 4-20. Attaching a 3.5-inch drive to the 5.25-inch adapter

Compaq Professional Workstation AP200 Reference Guide

Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003

File Name: E-CH04.DOC Last Saved On: 1/19/99 9:40 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED