2-12 Software
When running TEST:
1.Select the option to view the device list. A list of the installed hardware devices appears.
2.Verify that TEST correctly detected the devices installed. This utility will detect all devices manufactured by Compaq; devices from other manufacturers may not be detected.
❏If the list is correct, select OK and go on to Step 3.
❏If the list is incorrect, make sure that any new devices are properly installed. If you do find an installation problem, call your Compaq Authorized Dealer, Reseller, or Service Provider.
3.Select one of the following from the test option menu:
❏Quick Check Diagnostics— This option runs a quick, general test on each device with a minimal number of prompts. If errors occur, they are displayed when the testing is complete.
❏Automatic Diagnostics— This option runs unattended, maximum testing of each device with minimal prompts. You can choose how many times to run the tests, to stop on errors, or to print or file a log of errors.
❏Prompted Diagnostics— This option allows maximum control over the device testing process. You can choose attended or unattended testing, decide to stop on errors, or choose to print or file a log of errors.
4.Follow the instructions on the screen as the diagnostic tests are run on the devices. Record any error message numbers and have them available when you contact your Compaq Authorized Dealer, Reseller, or Service Provider for assistance.
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name:
