Removing an Expansion Board
1.Turn off the workstation and any external devices, then disconnect the power cord from the grounded AC outlet. Disconnect the network cable and any external devices from the system.
NOTE: You would remove the Accelerated Graphics Port (AGP) graphics controller the same way you would remove another expansion board.
IMPORTANT: On a
2.Remove the workstation access panel.
3.Disconnect any cables attached to the expansion board.
4.Remove the screw at the side of the expansion slot.
5.Hold the board at each end and carefully rock it back and forth until the connectors pull free from the slot. Be sure not to scrape the board against other components.
Figure 4-14. Removing an expansion board
The processor in your workstation may look slightly different than the one pictured.
6.Store the board in antistatic packaging.
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name:
