Installation Sequence
It is very important that you follow this sequence of steps to ensure the proper installation of any optional equipment.
1.If the workstation is already on, turn it off and disconnect the power cord from the wall outlet.
2.Disconnect the keyboard, monitor, network cable, and other external equipment connected to the workstation.
WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications/telephone connectors into the network interface controller (NIC) receptacles.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching.
CAUTION: Static electricity can damage the electronic components of the workstation or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See Appendix B for more information.
3.Open the workstation by removing its access panel. See “Removing the Workstation Access Panel” in this chapter for instructions.
4.Install any optional equipment. For instructions, see the applicable sections of this chapter and the documentation provided with the optional equipment.
5.Replace the workstation access panel.
6.Reconnect the keyboard, monitor, network cable, and other external devices.
7.Reconnect the power cord to the wall outlet.
8.Turn on the monitor, workstation, and other external devices.
9.Reconfigure the workstation, if necessary. See the following section, “When to Reconfigure the Workstation.”
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name:
