Compaq AP200 manual Computer Checkup Test, View System Information Inspect, 10Software

2-10Software

Computer Checkup (TEST)

NOTE: Computer Checkup will detect Compaq hardware. Devices from other manufacturers may not be detected.

Use Computer Checkup (TEST):

■To determine if all the devices installed on the workstation are recognized by the system and functioning properly. Running TEST is optional but recommended after installing or connecting a new device.

■To save, print, or display the information generated by TEST. You should run TEST and have the printed report available before placing a call to the Compaq Customer Support Center.

■To assist your Compaq Authorized Dealer, Reseller, or Service Provider in analyzing the system by allowing the Service Provider to reproduce the same environment on another workstation for testing.

For information on using TEST, see the section “Using Computer Checkup (TEST) or View System Information (INSPECT)” in this chapter.

View System Information (INSPECT)

NOTE: View System Information will detect Compaq hardware. Devices from other manufacturers may not be detected.

Use View System Information (INSPECT):

■To view information about the system once it has been configured.

■To save, print, or display the information generated by INSPECT. You should run INSPECT and have the printed report available before placing a call to the Compaq Customer Support Center.

■To assist your Compaq Authorized Dealer, Reseller, or Service Provider in analyzing the system by allowing the Service Provider to reproduce the same environment on another workstation for testing.

Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003

File Name: C-CH02.DOC Last Saved On: 12/15/98 4:21 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED