2.Lift the battery out of its holder.
Figure 4-27. Removing the coin cell battery
3.Slide the replacement battery into position.
NOTE: Positive polarity should be positioned up.
4.The battery holder automatically secures the battery in the proper position.
5.Replace any expansion boards you have removed.
6.Replace the workstation access panel.
7.Plug the network cable back into the system. Plug the power cord back into the grounded AC outlet and reconnect external devices.
8.Plug in the workstation and turn on the power.
Reset the date and time, your passwords, and any special system setups using Compaq Computer Setup. See Chapter 2, “Software.”
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name:
