Removing the Workstation Access
Panel
1.Turn off the workstation and any external devices.
2.Disconnect the power cord from the grounded AC outlet, the network cable from the system, then disconnect any external devices.
CAUTION: Before removing the workstation access panel, ensure that the workstation is turned off and that the power cord is disconnected from the grounded AC outlet.
3.Remove the two screws that secure the access panel to the workstation chassis.
4.Slide the access panel back about 1 inch (2.5 cm), then lift it off the unit.
Figure 4-1. Removing the workstation access panel
To replace the access panel, reverse the above steps.
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name:
