Compaq AP200 manual Grounding Methods, 2Electrostatic Discharge

B-2Electrostatic Discharge

Grounding Methods

There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts:

■Use a wrist strap connected by a ground cord to a grounded workstation

or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm ± 10 percent resistance in the ground cords. To provide

proper ground, wear the strap snug against the skin.

■Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats.

■Use conductive field service tools.

■Use a portable field service kit with a folding static-dissipating work mat.

If you do not have any of the suggested equipment for proper grounding, have an Authorized Compaq Reseller install the part.

NOTE: For more information on static electricity, or assistance with product installation, contact your Authorized Compaq Reseller.

Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003

File Name: I-APPB.DOC Last Saved On: 12/12/98 10:08 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED