![](/images/new-backgrounds/1299300/299300113x1.webp)
3-22 Intelligent Manageability
Remote Security Management is performed in two stages:
1.System administrator uses the Remote Management Setup software on a centralized management console to define the security parameters.
2.System administrator uses a PC LAN management product to distribute the settings over the network to remote Compaq workstations.
For more information about the Remote Management Setup software and enabling Remote Security Management, refer to the online Remote Management Administrators Guide included with the Remote Management Administration Tools, and available in the Support Software CD kit or at the Compaq website: http://www.compaq.com.
Remote Wakeup and Remote Shutdown
Your workstation has a network card installed that supports the Compaq Remote Wakeup and Remote Shutdown functions. These functions allow a system administrator to power on and power off a client workstation from a remote location, supported by PC LAN management tools.
NOTE:
Remote Wakeup allows the network interface controller to continue functioning, even when power to the workstation has been turned off.
NOTE: The workstation continues to consume a small amount of electricity even after you turn it off. Only when you disconnect the power cord from the electrical outlet does the workstation stop consuming electricity.
For more information on using Remote Wakeup and Remote Shutdown, refer to the online Remote Management Administrators Guide included with the Remote Management Administration Tools, and available in the Support Software CD kit or at the Compaq website: http://www.compaq.com.
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name: