Compaq AP200 manual Clearing Passwords

3-13

Clearing Passwords

To disable the Power-On or Setup Password features, or to clear the Power-On or Setup Passwords if you forget them and cannot access the workstation system or Computer Setup:

1.Set SW1, Position 1, to the ON position.

2.Turn on the workstation and allow the operating system to start. This clears the current passwords and disables the password features.

3.To re-enable the password features, turn off the workstation and set SW1, Position 1, to the OFF position.

4.Turn on the workstation and establish new passwords. See the beginning of this section, “Password Security, ” for instructions.

Compaq Professional Workstation AP200 Reference Guide

Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003

File Name: D-CH03.DOC Last Saved On: 1/19/99 9:39 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED