![](/images/new-backgrounds/1299300/29930091x1.webp)
Establishing a Power-On Password
Using Computer Setup
Establishing a
1.Turn on or restart the workstation.
2.When you see the words “F10=Setup” appear in the
NOTE: If you do not press the F10 key while the message is displayed, you must manually turn the workstation off, then on again to access the utility.
3.From the main menu, select Security, then select
4.Save the configuration and exit the utility.
5.Restart the workstation.
Entering a Power-On Password
To enter a
1.Turn on or restart the workstation.
2.When the key icon appears on the monitor, enter your current password.
NOTE: Type carefully; for security reasons, the characters you type do not appear on the screen.
If you enter the password incorrectly, a broken key icon appears. Try again. After three unsuccessful tries, you must turn off the workstation, then turn it on again before you can continue.
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name: