4-20 Hardware Upgrades
4.Slide the expansion board into the expansion slot and press it firmly into
place. |
|
Figure | Installing an expansion board |
The processor in your workstation may look slightly different than the one pictured.
NOTE: When you install an expansion board, make sure you press firmly on the board so that the whole connector seats properly in the expansion board slot
5.Replace the screw at the side of the expansion slot.
6.Replace the workstation access panel.
7.Connect external cables to the installed board, if needed.
8.Plug the network cable back into the system. Plug the power cord back into the grounded AC outlet. Reconnect external devices.
9.Reconfigure the workstation, if necessary. See the “When to Reconfigure the Workstation” section in this chapter.
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments:
File Name:
