Compaq AP200 manual 16Troubleshooting, Were installed, Files containing

6-16Troubleshooting

Solving Network Problems Continued

Problem	Cause	Solution
Diagnostics passes, but	Network driver is not	Make sure the network driver is
the workstation does	loaded, or driver	loaded and that the driver
not communicate with	parameters do not	parameters match the
the network.	match current	configuration of the network
(Continued).	configuration.	controller.
	The network controller	Select the Network icon at the
	is not configured for	Control Panel.
	this workstation.
Network controller	Network controller	Under the Computer Setup
stopped working when	interrupt with an	Advanced menu, change the
an expansion board	expansion board	resource settings for the board.
was added to the
workstation.
	The network controller	Verify that the driver was not
	requires a driver.	accidentally deleted when the
		drivers for a new expansion board
		were installed.
	The files containing the	Reinstall the network driver using
	network driver are	the Compaq SmartStart for
	corrupted.	Workstations CD.
Network controller	The files containing the	Reinstall the network driver using
stopped working	network driver are	the Compaq SmartStart for
without apparent	corrupted.	Workstations CD.
cause.
	The cable is not	Verify that the cable is securely
	securely connected.	attached to the network connector
		and that the other end of the cable
		is securely attached to the correct
		device.
		Continued

Writer: IM Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003

File Name: G-CH06.DOC Last Saved On: 12/15/98 4:26 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED