Q-Logic 59048-02 A manual Following is an example of the Set Config Switch command

A – Command Line Interface Set Config Command

Q

The following is an example of the Set Config Switch command:

SANbox2 #> admin start
SANbox2 (admin) #> config edit
SANbox2 (admin-config) #> set		config	switch
A list of attributes with formatting and default values will follow.
Enter a new value or simply		press the ENTER key to accept the current			value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key			to do so.
AdminState	(1=Online, 2=Offline, 3=Diagnostics) [Online				]
BroadcastEnable	(True / False)			[False	]
InbandEnabled	(True / False)			[False	]
DefaultDomainID	(decimal	value,	1-239)	[11	]
DomainIDLock	(True / False)			[True	]
SymbolicName	(string,	max=32	chars)	[SANbox2 switch]
R_A_TOV	(decimal	value,	100-100000 msec)	[10000	]
E_D_TOV	(decimal	value,	10-20000 msec)	[2000	]
PrincipalPriority	(decimal	value,	1-255)	[254	]
ConfigDescription	(string,	max=32	chars)	[	]
FC-SW-2 Compliant	(True / False)			[True	]

The following is an example of the Set Config Threshold command:

SANbox2 #> admin start

SANbox2 (admin) #> config edit

SANbox2 (admin-config) #> set config threshold

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER	key to do so.
ThresholdMonitoringEnabled	(True / False)	[False]
CRCErrorsMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[25 ]
FallingTrigger	(decimal value, 0-1000)	[1 ]
SampleWindow	(decimal value, 1-1000 sec) [10 ]
DecodeErrorsMonitoringEnabled	(True / False)	[True]
RisingTrigger	(decimal value, 1-1000)	[200 ]
FallingTrigger	(decimal value, 0-1000)	[0 ]

A-40 59048-02 A