Q-Logic 59048-02 A manual Switch Data Window, Name Server Data Window Entries

4 – Managing Switches Displaying Switch Information

Q

„Right-click a switch in the topology display and select Refresh Switch from the popup menu.

„Right-click in the graphic window of the faceplate display, and select Refresh Switch from the popup menu.

4.2.1

Name Server Data Window

The Name Server data window displays information about the devices that are logged into the fabric. Choose the Name Server tab below the data window to display name server information for all devices that are logged into the selected fabric. To narrow the display to devices that are logged into specific switches, select one or more switches in the fabric tree or the topology display. Refer to Table 4-2for a description of the entries in the Name Server data window. Refer to ”Exporting Name Server Information to a File” on page 4-13for exporting name server information.

	Table 4-2. Name Server Data Window Entries
Entry		Description
Target/Initiator		Device type: target or initiator
Switch		Switch name
Port		Port number (0–63)
Address		Fibre Channel address
Type		Node type
WWNN		Node worldwide name
WWPN		Port worldwide name
Vendor		Host Bus Adapter/Device Vendor
FC-4 Types		Device Fibre Channel protocol types
Active Zones		The active zone to which the device belongs

4.2.2

Switch Data Window

The Switch data window displays current network and switch information for the selected switches. Refer to ”Configuring a Switch” on page 4-14for more information about the Switch data window. To open the Switch data window, select one or more switches in the topology display and choose the Switch tab below the window. You can also open the Switch data window in the faceplate display. Table 4-3describes the Switch data window entries.

4-6 59048-02 A