In-Order-Delivery, Input Power LED, NLPort | Q-Logic 59048-02 A

Q

SANbox2-64 Switch Management User’s Guide

In-Order-Delivery

A feature that requires that frames be received in the same order in which they were sent.

Input Power LED

A chassis LED that indicates that the switch logic circuitry is receiving proper DC voltages.

Inter-Switch Link

The connection between two switches using E_Ports.

I/O Blade

Fibre Channel component of the

SANbox2-64 switch.

IP

Internet Protocol

LIP

Loop Initialization Primitive sequence

Logged-In LED

Aport LED on SANbox2-8c and SANbox2- 16 switches that indicates device login or loop initialization status.

Maintenance Mode

Maintenance mode sets the IP address to

10.0.0.1and provides access to the switch for maintenance purposes.

Management Information Base

A set of guidelines and definitions for SNMP functions.

Management Workstation

PC workstation that manages the fabric through the fabric management switch.

Mesh Topology

A fabric in which each chassis has at least one port directly connected to each other chassis in the fabric.

MIB

Management Information Base

Multistage Topology

A fabric in which two or more edge switches connect to one or more core switches.

NL_Port

Node Loop Port. A Fibre Channel device port that supports arbitrated loop protocol.

N_Port

Node Port. A Fibre Channel device port in a point-to-point or fabric connection.

Output Power LED

A power supply LED that indicates that the power supply is providing DC voltage to the switch. Applies only to SANbox2-16 and SANbox2-64 switches.

Over Temperature LED

A chassis LED or a power supply LED that indicates that the switch or power supply is overheating.

Pending Firmware

The firmware image that will be activated upon the next switch reset.

Port Status LED

Adual-function port LED on a SANbox2- 64 switch that indicates device login or loop initialization status, and port activity.

POST

Power On Self Test

Glossary-3

59048-02 A

Image 217

Q-Logic 59048-02 A In-Order-Delivery, Input Power LED, Inter-Switch Link, Logged-In LED, Maintenance Mode, Mesh Topology

Contents

SANbox2-64 Switch Management User’s Guide Document Revision History SANbox2-64 Switch Management User’s Guide Table of Contents Section Managing Fabrics Displaying Switch Information Section Managing SwitchesLink Data Window Section Managing Ports Managing I/O Blades Command Syntax Appendix a Command Line InterfacePort Information Data Window Glossary Index Appendix B Graphing Port PerformancePrinting Graphs Saving Graph Statistics to a File Tables Switch Resets Switch Administrative States Timeout ValuesMenu Shortcut Keys Tool Bar Buttons Severity Levels Edit Zoning Window Tool Bar Buttons Port Administrative States Port Speeds Port Modes Related Materials Intended Audience Availability Technical SupportTraining Contact Information Management Workstation Requirements Installing SANbox Manager SANsurfer Management Suite Disk Windows Installation Enter the following command SANsurfer Management Suite Disk Linux Installation SANsurfer Management Suite Disk Solaris Installation SANbox2 Installation Disk Linux Installation SANbox2 Installation Disk Windows InstallationSANbox2 Installation Disk Solaris Installation „ For a Solaris platform, enter the SANboxManager command „ For a Linux platform, enter the SANboxManager commandStarting SANbox Manager SANbox Manager Window Exiting SANbox Manager Save Default Fabric File Dialog SANbox Manager Uninstalling SANbox Manager Saving and Opening SANbox Manager Fabric View Files Changing the SANbox Manager Default Fabric File Password Preferences Dialog SANbox Manager Setting SANbox Manager Preferences Viewing Software Version and Copyright Information Using Online HelpSANbox Manager User Interface Topology Display Menu BarFaceplate Display SANbox Manager Menu Structure Menu Shortcut Keys Most menu selections have shortcut keys as shown in Table Tool Bar Buttons Tool Bar Fabric Tree Fabric Tree Graphic Window Working Status IndicatorData Window and Tabs Switch and Link Status Using the Topology Display Selecting Switches and Links Working with Switches and LinksArranging Switches in the Display Topology Data Windows Opening the Faceplate Display and Topology Popup Menus Blades Using the Faceplate Display Working with I/O Blades and Ports Port Views and StatusSelecting I/O Blades and Ports Faceplate Data Windows Opening the Faceplate Popup Menu Security User Authentication Inband Management Inter-Switch Link Security Adding a Fabric Managing the Fabric DatabaseChoose the Add Fabric button Opening a Fabric View File Removing a FabricSaving a Fabric View File Rediscovering a Fabric Adding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Deleting Switches and LinksFabric Status Switch Icon Description Topology Display Switch and Status Icons Events Browser Displaying the Event Browser Severity Description Icon Severity Levels Filter Events Dialog Filtering the Event Browser Save the Event Browser to a File Sorting the Event BrowserActive Zone Set Data Window Active Zone Set Data Window Zoning a Fabric Zones Zoning ConceptsSoft Zones Virtual Private Fabric Hard Zones Access Control List Hard Zones Zone Sets AliasesZoning Database Using the Zoning Config Dialog Zoning ConfigurationFC-SW-2 Auto Save Restoring Default Zoning Default VisibilityMerging Fabrics and Zoning Zone Merge Failure Zone Merge Failure Recovery Edit Zoning Window Using the Edit Zoning Window Edit Zoning Window Tool Bar Buttons Creating a Zone Set Managing Zone Sets Copying a Zone to a Zone Set Activating and Deactivating a Zone SetRemoving a Zone from a Zone Set or from All Zone Sets Removing All Zoning Definitions Removing a Zone Set Creating a Zone in a Zone Set Managing Zones Adding Zone Members Removing a Zone Member Renaming a Zone or a Zone SetRemoving a Zone from a Zone Set Removing a Zone from All Zone Sets Managing Aliases Changing Zone TypesCreating an Alias Removing an Alias from All Zones Adding a Member to an Alias Managing Fabrics Zoning a Fabric 59048-02 a Factory User Accounts Managing User Accounts Creating User Accounts Account Administration Add Removing a User Account Account Administration Remove Account Administration Change Password Changing a User Account Password 4shows the faceplate display for the SANbox2-64 switch Displaying Switch Information Name Server Data Window Switch Data WindowName Server Data Window Entries Switch Data Window Entries Switch Data Window Entries Port Statistics Data Window Link Data WindowPort Information Data Window Configured Zonesets Data Window Configured Zonesets Data Window Alarm Threshold Configuration Dialog Configuring Alarms Count EventSample Interval Setting the Date and Time Paging a SwitchResetting a Switch Exporting Name Server Information to a File Switch Resets Configuring a Switch Switch Properties Dialog Switch Properties Switch Administrative States Symbolic NameSwitch Administrative States Domain ID and Domain ID Lock FC-SW-2 Compliance for Zoning Broadcast Support Timeout Values Timeout ValuesLegacy Port Address Format Network Properties Dialog Network Properties IP Configuration Parameters IP Configuration Snmp Configuration Parameters Snmp Configuration Snmp Trap Configuration Parameters Snmp Trap ConfigurationRemote Logging Archiving a Switch 10. Restore Dialogs Full and Selective Restoring a Switch Managing Switches Restoring a Switch Managing Firmware Installing Firmware 10. Factory Default Configuration Settings Restoring the Factory Default ConfigurationActivating the Pending Firmware Changing the Pending Firmware 10. Factory Default Configuration Settings Blade Information Data Window Entries Displaying I/O Blade Information Testing an I/O Blade Changing the I/O Blade Administrative State Hot Swap Wizard Resetting an I/O Blade Managing I/O Blades Hot Swap Wizard Displaying Port Information Managing Ports Displaying Port Modes Monitoring Port StatusPort Modes Displaying Port Speeds Displaying Port Operational StatesPort Operational States Port Speeds Transceiver Media View Displaying Transceiver Media StatusPort Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Name Server Data Window Port Properties Dialog Configuring Ports Port Administrative States Changing Port Administrative States Changing Port Modes Changing Port Speeds Changing Buffer-to-Buffer Credits Scan Device Stream GuardExtending Port Credits Designate Donor Ports Resetting a Port Port Loopback Test Dialog Testing Ports Managing Ports Testing Ports Logging On to a Switch Command Line Interface Table A-1. Command-Line Completion Command Syntax Table A-2. Commands Listed by Authority Level Commands Authority Admin CommandSyntax Keywords Authority Admin Syntax alias Alias Command Remove alias members Members aliasRename aliasold aliasnew Syntax config Config CommandKeywords activate config Edit config Archive function are not compatible with the Config Restore RestoreCommand Save config Ftp get configdata ftp quit # ftp symbolicname or ipaddress Syntax date Date CommandKeywords MMDDhhmmCCYY Activation. Otherwise, you can use the Reset Switch command Fallback CommandFollowing is an example of the Fallback command Fallback Syntax Hardreset Command Keywords command Help CommandSyntax help command keyword Authority User Authority User Syntax history History Command Hotreset Hotreset CommandFabric is in the diagnostic operational state This command clears the event log and all counters Authority Admin Syntax hotswap Hotswap Command To replace? 1,2,3,4,6,7,8,9 1 Authority Admin Syntax image cleanup Image CommandKeywords cleanup Unpack file Authority Admin Lip CommandReinitializes the specified loop port Syntax lip portnumber Keywords portnumber Syntax passwd accountname Keywords accountname Passwd Command Authority User Syntax Ping Ping CommandIpaddress Keywords ipaddress Following is an example of the Ps command Ps CommandSyntax Examples Displays current system process information Closes the Telnet session Quit CommandSyntax quit, exit, or logout Authority Admin Syntax reset Reset CommandConfig configname Table A-4. Port Configuration Defaults Table A-3. Switch Configuration DefaultsSystem Zoning Table A-5. Alarm Threshold Configuration Defaults Table A-7. Snmp Configuration Defaults Table A-6. Zoning Configuration Defaults Table A-8. System Configuration Defaults Syntax set Set Command Switch state Setup optionLog option Pagebreak state Table A-9. Set Config Port Parameters Set Config CommandKeywords blade slotnumber Port portnumber Send Arbff True instead of IDLEs Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Threshold Table A-11. Set Config Threshold Parameters Memory. Refer to FC-SW-2 Compliant on Table A-12. Set Config Zoning Parameters Press q or qq and the Enter key to do so Arbff Following is an example of the Set Config Port command Following is an example of the Set Config Threshold command Following is an example of the Set Config Switch command Following is an example of the Set Config Zoning command Set log Set Log CommandArchive Clear Port portlist Level level Start SaveStop Stops logging of events Enable Set Port CommandBypass alpa Speed transmissionspeed Set setup Set Setup CommandTable A-13. Snmp Configuration Settings Snmp System Table A-14. System Configuration Settings This process before reaching the end of the list SANbox2 admin # set setup system Following is an example of the Set Setup System command Alarm Show CommandKeywords about Blade Ns option Log option Panel PagebreakPerf option Table A-15. Show Port Parameters LIP Alpd Alps Slot slotnumber Post logSteering domainid Support Topology Displays switch operational informationDisplays all connected devices Users Following is an example of the Show Domains command Following is an example of the Show Chassis command Following is an example of the Show Panel command Following is an example of the Show Fabric commandFollowing is an example of the Show NS local domain command Following is an example of the Show NS portID command Following is an example of the Show NS domainID commandFollowing is an example of the Show Interface command LIPF8F7 Following is an example of the Show Port command Following is an example of the Show Slot command Following is an example of the Show Topology command Following is an example of the Show Switch command Command Line Interface Show Command Following is an example of the Show Version command Show config Show Config CommandBlade slotnumber Following is an example of the Show Config Threshold command Following is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Keywords component Show Log Command Following is an example of the Show Log command Following is an example of the Show Log Options command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Syntax shutdown Shutdown Command Syntax test Test CommandPort portnumber testtype Status Test port x internal Command Line Interface Test Command Examples The following is an example of the Uptime command Uptime CommandAuthority User Syntax uptime Displays all user accounts that exist on the switch User CommandKeywords accounts Add Following is an example of the User Delete command Following is an example of the User Add commandFollowing is an example of the User List command Following is an example of the Whoami command Whoami CommandWhoami Syntax zone Zone Command Remove zone members Members zoneRename zoneold zonenew Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Delete zoneset Following is an example of the Zoneset List commandRemove zoneset zonelist Rename zonesetold zonesetnew Following is an example of the Zoneset Zones command Keywords active Zoning CommandEdit Opens a Zoning Edit session Limits Following is an example of the Zoning Limits command E2JBOD2 Following is an example of the Zoning List command Command Line Interface Zoning Command Graphing Port Performance Exiting SANsurfer Fabric View Starting SANsurfer Fabric View Saving and Opening SANsurfer Fabric View Fabric View Files Figure B-3. Load Default Fabric File SANsurfer Fabric View Figure B-5. Preferences SANsurfer Fabric View Setting SANsurfer Fabric View Preferences Displaying Graphs Setting the Polling Frequency Customizing Graphs Arranging Graphs in the Display Printing Graphs Saving Graph Statistics to a File Administrative State Access Control List ZoneBootP Class 2 Service Configured Zone Sets Class 3 ServiceDefault Visibility Fabric Management Switch Inter-Switch Link Input Power LEDMaintenance Mode Output Power LED Principal Switch Power On Self Test PostPrivate Device Private Loop Index Index-2 59048-02 a 59048-02 a Index-3 Index-4 59048-02 a 59048-02 a Index-5 Index-6 59048-02 a 59048-02 a Index-7 SANbox2-64 Switch Management User’s Guide Index-8 59048-02 a