Q-Logic 59048-02 A manual Pagebreak, Panel, Perf option, Table A-15. Show Port Parameters

A – Command Line Interface Show Command

Q

pagebreak

Displays the current pagebreak setting. The pagebreak setting limits the display of information to 20 lines (On) or allows the continuous display of information without a break (Off).

panel

Displays the hardware configuration and port mapping for a switch. The representation of the faceplate indicates power supply modules (PS), I/O blades (IO), and CPU module (CPU).

perf [option]

Displays performance information for all ports. Refer to the ”Show Perf Command” on page A-69.

port [port_number]

Displays operational information for the port given by [port_number]. Ports are numbered beginning with 0. If [port number] is omitted, information is displayed for all ports. Table A-15describes the port parameters.

	Table A-15. Show Port Parameters
Entry		Description
AIinit		Incremented each time the port begins AL initialization.
AIinitError		Number of times the port entered initialization and the
		initialization failed.
Bad Frames		Number of frames that have framing errors.
ClassXFramesIn		Number of class x frames received by this port.
ClassXFramesOut		Number of class x frames sent by this port.
ClassXWordsIn		Number of class x words received by this port.
ClassXWordsOut		Number of class x words sent by this port.
ClassXToss		Number of times an SOFi3 or SOFn3 frame is tossed from
		TBUF.
DecodeError		Number of decode errors detected
EpConnects		Number of times an E_Port connected through ISL
		negotiation.
FBusy		Number of times the switch sent a F_BSY because Class 2
		frame could not be delivered within ED_TOV time. Number of
		class 2 and class 3 fabric busy (F_BSY) frames generated by
		this port in response to incoming frames. This usually
		indicates a busy condition on the fabric or N_Port that is
		preventing delivery of this frame.

A-52 59048-02 A