Minicom Advanced Systems 5 manual Configuring the system components, Defining the KVM switches

KVM.NET

4. Configuring the system components

You must configure the system by inputting details of the:

∙KVM switches connected to IP Access units

∙Target servers connected to the KVM switches / IP Access units

∙IP Access units

As explained in the pre-installation guidelines, Appendix A on page 46 contains a list of all the details you need to prepare.

4.1 Defining the KVM switches

You must define all the KVM switch types that are physically connected to the systems IP Access units.

To define the KVM switch types:

From the menu, expand Settings see Figure 4.

Click here to expand the Settings list

Figure 4 Settings

1. Select KVM Switches. A list of KVM switches appears see Figure 5.

10