Serial tab elements | Minicom Advanced Systems 5UM70156 V1.1 12

KVM.NET

Enable DHCP – Enable DHCP to provide you with dynamic IP addressing for IP Access, if a DHCP server exist.

Active – Enable/disable Network activity of the IP Access via KVM.net. Note: Any change in the Network configuration forces IP Access to restart.

4.3.1.5The Serial tab elements

Click the Serial tab. The following appears.

Figure 14 The Serial tab

You can access a Serial Network device during an IP Access remote session by emulating its Serial connection via RS232 (VT100 & TTY). Only users with administrative privileges can operate a Serial managed Network Devices (such as a Power management device)

Define the console parameters for controlling Network devices over RS232 via the IP Access Serial connector.

Device Name - type the name of the device (i.e. Power Management; CISCO router; etc)

Baud Rate, Data Bits, Parity, Stop bits - type the appropriate values according to the network device specifications, attached to the IP Access.

To open the Serial emulation window via remote session refer to the IP Access User Guide – Configuring Serial devices.

18

Image 19

Minicom Advanced Systems 5UM70156 V1.1 12 manual Serial tab elements

Contents

KVM.net User Guide Copyright Table of Contents Accessing the system as a User Introduction Key features Terminology Pre-installation guidelinesSystem components Pointer tab Obtaining an IP address via Dhcp Connecting and setting up the systemConnecting the hardware Initial Settings Accessing the KVM.net Manager from a remote location Changing the Root user’s passwordSetting the system’s date and time Accessing the KVM.net Manager from outside a Firewall Displaying the Web interface IP Access status Defining the KVM switches Configuring the system components Creating Target servers Importing a new KVM Switch New from scratch- General tab General tab elements Mouse parametersAdvanced tab elements Deleting Targets Configuring the IP Access units General tab elements Assigning a name to an IP Access unit Target tab elements KVM Switches tab elements Network tab Network tab elements Serial tab Serial tab elements Advanced button Deleting an IP Access unit Forming users into groups Using the system an overview General tab elements Creating a user Targets tab elements All Users list User summary Deleting a User Creating a User Group Members tab Members tab elements Users Group tab Adding Users to a Group Associating User/Groups with Targets When editing a User Select User Groups / All UsersDeleting Users from a Group Deleting from the menu Expand User Groups When editing a Target Select Target Sets / All TargetsDisassociating a User/Group from a Target Deleting a User Group Create Target Set General tab Creating a Target Set Deleting a Target Set Users tab elementsDeleting from the menu Expand Target Sets Target Sets Associating Target servers with Target Sets Creating a Target Profile Creating ProfilesAdvanced tab elements Right-clickDevice Profiles. New Profile appears Creating an IP Access Profile Network tab elements Serial tab elements Upgrading the KVM.net/IP Access firmware Maintenance featuresBackup Schedule Backup elements Account policy Password policy Account blocking Idle timeout Updating the system General Administration of the systemExiting the KVM.net Manager system Shutting down the KVM.net Manager system Rebooting KVM.net Manager systemActivity Log Status column Accessing the system as a User My Properties Accessing an IP Access unit directlyConnecting to a Target server Navigating the Web display Technical Specifications Appendix a Regional Offices