Dimensions and Values

Table 2-2lists the dimensions and values of the HP Integrity rx3600 for a rack- or pedestal-installed configuration .

Table 2-2 Rack- or Pedestal-Installed Server Dimensions and Values

Dimension

Value

Server weight (loaded product weight range

34-40.8 kg (75-90 lbs.)

estimate)

 

Rack

 

Rack dimensions (depth x width x height)

69.6 cm (27.4 in.) x 44 cm (17.32 in.) x 17.24 cm (6.8 in.)

Rack weight

Max: 45.36 kg. (100 lbs.)

Rack unit

Server takes up 4U in a rack

Pedestal

 

Pedestal dimensions (depth x width x height)

69.2 cm (27.2 in.) x 36.9 cm (14.5 in.) x 51.2 cm (20.2 in.)

Pedestal weight

10.9 kg (24 lbs.)

Minimum standalone configuration

44.9 kg. (99 lbs.)

Maximum standalone configuration

51.7 kg. (114 lbs.)

Grounding

The site building shall provide a safety ground/protective earth for each AC service entrance to all cabinets.

Install a PE (protective earthing) conductor that is identical in size, insulation material, and thickness to the branch-circuit supply conductors. The PE conductor must be green with yellow stripes. The earthing conductor is to be connected from the unit to the building installation earth or, if supplied by a separately derived system, at the supply transformer or motor-generator set grounding point.

Electrical Specifications

This section provides electrical specifications for the HP server.

System Power Specifications

Available power (output) is the maximum dc power that the power supply can supply to the system.

Maximum input power is what the power supply requires from the AC line to deliver that maximum DC output (given worst case efficiency and max loading)

Maximum input current is the worst case/highest current given the lowest input voltage and the maximum input power

Table 2-3 System Power Specifications

Parameter

Rating

 

ac Voltage

100-127 V ac

200-240 V ac

Maximum dc Output Power

1200 W

1200 W

Maximum System Input Current

14 A1

7A1

Input frequency

47 to 63 Hz

47 to 63 Hz

48 System Specifications

Page 48
Image 48
HP INTEGRITY RX3600 manual Dimensions and Values, Grounding, Electrical Specifications, System Power Specifications

INTEGRITY RX3600 specifications

The HP Integrity RX3600 is a high-performance server designed to address the demanding needs of enterprises that require robust computing capabilities, reliability, and scalability. Part of the HP Integrity server family, the RX3600 is built on the Itanium architecture, which is known for its exceptional processing power and advanced features that support mission-critical applications.

One of the main features of the RX3600 is its capability to handle multiple workloads with ease. The server supports up to 64 GB of RAM, allowing for efficient multitasking and enhanced performance in data-intensive environments. Its modular design also enables organizations to scale up their systems by adding additional memory or processors as needed, making it a flexible choice for growing businesses.

The RX3600 is equipped with HP's Integrity Virtual Machines (VMs), which provide virtualization capabilities that allow businesses to run multiple operating systems and applications on a single physical server. This not only maximizes resource utilization but also simplifies management by reducing the number of physical servers required in the data center.

Another significant characteristic of the RX3600 is its advanced reliability features. The server is designed with fault-tolerant components, including redundant power supplies and cooling systems. This ensures that the server remains operational even in the event of hardware failures. Additionally, HP's Error Correction Code (ECC) memory helps detect and correct data corruption, further enhancing the system's reliability.

For security, the HP Integrity RX3600 includes built-in features such as Secure Boot, which ensures that the server boots using only trusted firmware and software. This protects against unauthorized changes and vulnerabilities that could compromise data integrity.

In terms of connectivity, the RX3600 offers multiple I/O options, including advanced networking capabilities that support high-speed data transfer and improved bandwidth. This is critical for organizations that rely on data-intensive applications and need to maintain seamless connectivity.

Furthermore, the server supports a range of operating systems, including HP-UX and Linux, making it adaptable to various enterprise environments. Its robust performance, reliability, and scalability make the HP Integrity RX3600 an ideal choice for businesses looking to optimize their IT infrastructure and support their critical workloads with confidence.