EBSU Utility

The EFI-based Setup Utility (EBSU) provides an easy-to-use interface for flashing firmware, partitioning the hard disk, installing diagnostic tools, configuring storage controllers, and running other EFI utilities.

NOTE: You can use EBSU to update firmware for many different devices in the system. A Smart Array Controller is shown as an example.

To update the Smart Array Controller firmware:

1.Power on the server. The server boots to EFI. The EFI Boot Manager may be used from the enhanced interface (grey background) or the legacy interface (black background).

2.Load the HP Smart Setup media into the server DVD drive.

3.From the EFI Boot Menu, select Internal Bootable DVD and press Enter. EBSU starts and displays the Welcome screen.

Figure 3-25 EBSU Welcome Screen

4.Select OK and press Enter to continue.

5.From the main menu, select Maintain Firmware and press Enter.

Figure 3-26 EBSU Main Menu

6.In the Maintain Firmware screen, use the tab key to scroll down to the Device section.

Core I/O Card Configuration 113